Erikson Commercial : Ansr Audio

Omni-directional (AM-14)
Full frequency response with natural clarity
AM-14 has outstanding clarity and no proximity buildup
Comfortable low neck attachment with adjustable boom
Headband is highly resistant to corrosion and easy to clean
Compatible with all Ansr Audio wireless systems

AM-15

Tight-cardioid (AM-15)
Full frequency response with natural clarity
AM-15 is featured for stage use and high gain before feedback
Comfortable low neck attachment with adjustable boom
Headband is highly resistant to corrosion and easy to clean
Compatible with all Ansr Audio wireless systems

THE ANSR is designed to be the ultimate in wireless microphones. This innovative, single ear microphone has an omni-directional pattern

AM-80

THE AM-80 is a large diaphragm Electret Condense Microphone.Ideal for recording or sound reinforcement. The AM-80 can be used for micing choirs give the overall sound additional low end responce.

Element: Electret Condenser Microphone (comes in Gold or Black)
Polar Pattern: Cardioid
Frequency Response: 30Hz – 20KHz
Sensitivity: -58.5dB +/- 2dB
(0dB = 1V/ microbar @ 1KHz open circuit)
Output Impedance: 250 Ohms
Noise Level: 22dB A weighted
Phantom Voltage: 48 VDC
Output Connector: Male XLR
Available in Black or Gold

1” Gold sputtered electret condenser element
One of the smallest overall 1” dimensioned microphones
Flat response for both recording and reinforcement applications
Good choir microphone for additional low end response
Available for both hanging and stand mounted applications ( stand shock mount adaptor AM-TM adaptor)
Available in both Gold Grille finish (AM-80) and overall black finish (AM-80B)

Download Spec Sheet

The AM-33 microphone from Ansr Audio has a telescoping feature that will allow any presenter to set the microphone at the right distance. The unit has a back-electret, uni-directional pattern and a smooth brilliant sound with excellent ambient noise control. The boom can be extended from 13.5" out to 22"

Telescoping boom
Phantom power operated (9 - 52 VDC)
Electret-condenser uni-directional element
Smooth brilliant response with low ambient noise
Low frequency roll off switch
Tailored frequency response for typical speech applications
Ultra-compact design with clean lines
Self contained power module
13.5 to 22 inch variable length

The AM-3400 Series condenser podium microphones are designed for optimal speech and vocal pickup. Features include a semi-rigid shaft for easy microphone placement and a balanced, low impedance output for connection to a standard 9-48V phantom powered microphone input.

Available in lengths of 12", 18", 24", 30", and custom lengths
Semi-rigid shaft for easy microphone placement
Frequency response optimized for voice recognition
Cardioid response pattern
Balanced, low impedance output
High quality, durable brass construction
Switchable sensitivity pad and low-end roll-off filter

The AM-38 short shotgun knuckle-joint podium microphone is designed for optimal speech and vocal pickup. The swivel knuckle-joint allows both horizontal and vertical movement for easy microphone placement.

Available in black or polished brass
Swivel knuckle-joint allows horizontal and vertical movement
Frequency response optimized for voice recognition
Hyper-cardioid response pattern
Shotgun type
Balanced, low impedance output
High quality, durable brass construction
Switchable sensitivity pad and low-end roll-off filter
Windscreen
Podium Shock Mount (Optional)
Podium Shock Mount with connector and assembly
Microphone base with programmable switch (Optional)
Microphone base with reed switch (Optional)

The AM-40 Series is a low-profile boundary layer microphone designed for easy installation into ceilings, walls, tables, staging sets and more. The durable white delrin construction contains a highly sensitive electret condenser transducer providing an omni-directional polar pattern and a wide frequency response.
The series is available in four different models including standard, weather resistant, line level out, and water resistant with line level out.

Low-profile boundary layer microphone
Omni-directional response pattern
Supplied phantom power adaptor for a balanced, low impedance output
Made from extremely durable, non-conductive, white Delrin
Easily mountable

The AM-41 is a permanently mounted surface microphone particularly suited to speech and voice reinforcement and special recording applicatons. For intercom applications to security, this microphone is well constructed and will provide years of reliable service.

White threaded body with all mounting hardware
Phantom power operated (9 - 52 VDC)
Electret-condensesr uni-directional element
Reduced room reverberation and excellent feedback rejection
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
Low profile miniature design

The AM-42 and the AM-42W are surface microphones particularly suited to speech and voice reinforcement and special recording applications. Both units are equipped with a response switch that allows them to be adjusted for particular surroundings

Black or white finish available
Phantom power operated (9 - 52 VDC)
Electret-condensesr uni-directional element
High output capability
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
Self contained low frequency tailoring switch

The capsules will house all powering circuitry allowing for true microphone level at the connector. No outside power modules will be required. Cardioid and Hypercardioid versions are available. A hanging version including mounting plate, connectors (screw type euro) and hanging clip are one example of a complete package.

Black or White finish available
Phantom power operated (9 - 52 VDC)
Electret-condensesr uni-directional element
High output capability
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
AM-51; AM-51W Hanging cardioid with all hardware and 25' cable
AM-52; AM-52W Hanging hypercardioid with all hardware and 25' cable

The AM55and 56 are clamp versions of our solution serries hanging microphones.The capsules will house all powering circuitry allowing for true microphone level at the connector. No outside power modules will be required. Cardioid and Hypercardioid versions are available. A hanging version including mounting plate, connectors (screw type euro) and hanging clip are one example of a complete package.

Phantom power operated (9 - 52 VDC)
Electret-condensesr uni-directional element
High output capability
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
Self contained low frequency tailoring switch

AM-55 6" flex, shockmount, Versattach clip cardioid
AM-56 6" flex, shockmount, Versattach clip hypercardioid

The AM-57 series cardiod microphone utilises the same versattach technology as our clamp and hanging microphones. The Ansr Boom is a 48 or 60 long complete assembly with a unique custom center piece. The boom is equipped with connectors on both ends and acts like a simple extension cord.

Black finish
Phantom power operated (9 - 52 VDC)
Electret-condenser uni-directional element
High output capability
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
Self contained low frequency tailoring switch

AW-W: The Windy Ansr is an intense noisecancelling windscreen designed for external use in high noise/high wind environments that most windscreens are powerless against.

The AM-58 series Hyper-cardiod microphone utilises the same versattach technology as our clamp and hanging microphones. The Ansr Boom is a 48 or 60 long complete assembly with a unique custom center piece. The boom is equipped with connectors on both ends and acts like a simple extension cord.

Black finish
Phantom power operated (9 - 52 VDC)
Electret-condenser uni-directional element
High output capability
Tailored frequency response for typical speech applications
Low ambient noise
Ultra-compact design with clean lines
Self contained power module
Self contained low frequency tailoring switch

AW-W: The Windy Ansr is an intense noisecancelling windscreen designed for external use in high noise/high wind environments that most windscreens are powerless against.

This is a 700 channel UHF, PLL synthesized wireless microphone system offered in both complete packages and as individual components providing the contractor with the latest in wireless technology. In both handheld and belt-pack configurations the systems offer rechargeable batteries included that can be connected to the receiver and fully charged in 4 to 6 hours. For all wireless applications the AW-700 system will provide years of reliable and consistent performance.

700 channels, UHF, PLL synthesized
True diversity operation
Receiver Display with channel, frequency, and volume level
Front panel lRF and audio level display
Receiver front panel channel select and volume select switches
Receiver front panel headphone output with control
Front panel DC output for charging transmitters
Balanced XLR and unbalanced 1/4 connectors
Rear panel squelch control
Half rack sized with both half and full rack mount kit included

Dynamic handheld microphone with full display
Transmitter channel and battery condition easily viewed
Channel select switches inside battery compartment
Rechargeable batteries included
No roll microphone head for protection
Four color end caps for identification

This is a 64 channel UHF, PLL synthesized wireless microphone system offered in both complete packages and as individual components providing the contractor with outstanding value in wireless technology. The AW-64 system offers a unique gooseneck stand alone transmitter with a rear mounted line input for presentations as one of the complete systems. In both handheld and belt-pack configurations the systems offer rechargeable batteries included that can be connected to the receiver and fully charged in 4 to 6 hours. For all wireless applications the AW-64 system will provide years of reliable and consistent performance.

64 channels, UHF, PLL synthesized
True diversity operation
Front Panel channel display
Front panel RF and audio level display
Receiver front panel group and channel select switches
Receiver front panel headphone output with control
Front panel audio output control
Front panel DC output for chargin transmitters
Balanced XLR and unbalanced 1/4 connectors
Rear panel squelch control
Half rack size with both half and full rack mount kit included

The AW-8 is a wireless gooseneck microphone with a self-contained transmitter. It has a power and microphone volume controls on the top panel, a microphone ‘mute’ switch with indicator, and the gooseneck posesses an in-use indicator for easy notice. When coupled with the 64 channel wireless receiver, the AW-8 wireless gooseneck microphone is perfect for the church or corprate environment where a podium style microphone is needed. With the RCA line input jack, the microphone can be used with most line level output equipment, making it one of the most innovative products in the AV market.

Gooseneck self contained transmitter
Rear mounted RCA line input jack
Power and microphone volume control on top panel
Microphone mmute switch and indicator
High and low shelving filters
Microphone "ON" indicator on gooseneck for easy notice

This is a 16 channel, UHF, PLL synthesized wireless microphone system offered in both complete packages and without microphones for the beltpack providing the contractor with outstanding value in wireless entry level systems. The system offers easy channel set up and will connect to almost any commercial or professional audio systems easily

WHAT'S NEW