Pacific Missouri – Lowell introduces 30A surge suppression technology at Infocomm booth 8629. Ready to install ACSP30 Series is offered in single and multi-circuit assemblies for rack, wall or loadcenter applications. Both styles have a 10-year warranty and protect 30A circuits by defeating line-to-neutral surges up to 72,000A and meeting GSA Grade A – Mode 1 – Class 1 endurance using Lowell's Triple Clamping Redundancy™ (TCR) technology.
Single circuit Series ACSP3001 is packaged in a compact enclosure with Lowell’s patented outlet/cover plates featuring both a NEMA L5-30R outlet and a blank cover for hardwire applications. Versatile design allows installation in a rack (without using panel space), on a wall surface, or above grade in a drop ceiling.
Multi-circuit Models ACSP30-1C, ACSP30-2C and ACSP30-3C feature one, two, or three 30A circuits enclosed in a box with terminal outputs and knockouts. These surge suppressors are designed for hardwire installation to an AC loadcenter or may be installed as a stand-alone surge suppressor in close proximity to the equipment being protected.
For 20A applications,
Lowell offers similar single and multi-circuit assemblies with optional Ground Transient Filter™ (GTF™) to provide surge suppression and blocking of potentially damaging high frequency transients on the ground wire. See also
Lowell’s sequenced AC loadcenter products, vertical AC strips and a variety of 19”W rackmount AC products with features including surge suppression, sequencing, remote control, alarm interface, and over/under protection.
Click here to download Lowell's new power products 2007!
Lowell’s new state of the art surge protector with auto-reset over/under voltage protection and remote power control is ideal for a wide range of applications. Model ACSPR-RPC1-1509 is a 15A device that provides safeguarded power distribution from a slim rackmount chassis with three un-switched outlets (1 front, 2 rear) and six switched outlets that can be remotely controlled.
The surge suppressor provides GSA Grade A – Mode 1 – Class 1 endurance along with UL1449-2 and ANSI C62.41 surge suppression compliance. Lowell’s over/under Voltage Tolerance Envelope™ (VTE) circuitry with auto reset feature is designed to turn all receptacles off when line voltage exceeds 140V or drops below 100V for circumstances such as extended power line surges or brown-outs that are introduced to the system. Following a voltage tolerance shutdown event, the unit will automatically restore power to the receptacles when the unit detects acceptable line voltage. If the shutdown event was a power outage, the switched receptacles will remain off until reactivated.
The unit’s remote power control (RPC) circuitry allows for on/off switching by external DSP timed events. Termination blocks on the rear are provided for remote triggering and on/off functions. An integral override is also included for life safety system applications where fire code mandates an alarm interface.
The 19”W x 1-3/4”H (1RU) surge suppression device with remote power control and over/under voltage protection features multi-color LED’s for easy visual identification of system status. The unit is backed by a 10-year warranty and is available with rocker or key switch activation; Models ACSPR-RPC1-1509 and ACSPR-RPC1-1509K respectively. Lowell also offers remote switch accessories and a wide selection of racks and enclosures.
The unit’s power rating is 120V AC, 60Hz/15A 1800W. It defeats surges up to 72,000A using Lowell’s Triple Clamping Redundancy™ (TCR) technology and provides excellent EMI /RFI filtering.
See this and Lowell's other new products at NSCA booth #1529 or Infocomm booth 2964 June 6-9, 2006 in Orlando, Florida.
Click here for Spec Sheet
Surge Suppressors with Ground Transient Filter
Lowell's ACSP line of UL and ETL-listed, single and multi-circuit 20A surge suppressors is now shipping with an optional built-in Ground Transient Filter™ (GTF™). Designed for rack, wall or loadcenter applications, the compact assemblies divert surges from line to neutral and utilize advanced filtering to block potentially damaging high frequency transients that typically go ‘unchecked’ on the ground wire.
The GTF-equipped surge suppressors are perfect for safeguarding sensitive equipment such as that used in telecommunications, security, fire, AV, and data applications, as well as corporate boardroom electronics, business PCs and retail point-of-sale terminals. GTF-equipped versions are recommended for use anywhere power quality is compromised by high frequency transients induced from building service systems, office machines, diagnostic and testing equipment, manufacturing or offsite electrical disturbances.
Equally capable of protecting equipment from transient voltages, spikes, and surges, every ACSP Series product shields line-to-neutral, defeats surges up to 72,000A and meets GSA Grade A – Mode 1 – Class 1 endurance using Lowell's proprietary Triple Clamping Redundancy™ (TCR) technology.
Lowell’s ACSP single 20A circuit surge suppressor models with GTF feature two isolated ground duplex outlets on rotating 90° plates for easy front or side access in rear rackmount or surface applications. Outlet plates can also be replaced with blank 90° plates (also provided) to maintain a clean appearance in hard-wire applications.
ACSP multi-circuit models with GTF feature up to six 20A circuits enclosed in a box with terminal outputs and knockouts to provide surge suppression and ground transient filtering for AC loadcenters. The devices may also be used with Lowell’s time-sequenced loadcenter system. Ground transient filter (GTF) technology is available exclusively from authorized Lowell dealers nationwide.
.
Seismic Certification for Essential Facilities
Lowell cabinets receive additional SEISMIC CERTIFICATION FOR ESSENTIAL FACILITY installations
Lowell seismic (-S) series racks and cabinets are now qualified for use in essential facilities under the IBC 2003 Building Code that insures the survival and operability of critical equipment following a seismic event. This qualification is in addition to Lowell's existing seismic certifications for anchorage under the UBC & CBC Zones 1, 2, 3, 4 seismic design provisions that provide life-safety protection for building occupants from cabinets falling over or obstructing egress routes. This latest Seismic certification for essential facilities is important for the specifying and installation community as Lowell's (-S) seismic installation package provides all the necessary documentation required for submission. This means that a structural engineer will not be required to perform the seismic calculation for each cabinet and rack location in a building or to generate the quality assurance documents (seismic calculations, installation drawings, and quality assurance plan for special inspections) required by the applicable Authority having Jurisdiction or Building Official. Lowell's document package, certified by an outside professional engineering firm, satisfies the technical seismic and quality assurance requirements of the IBC for facilities with an Importance Factor of 1.5 and ground motion levels (spectral acceleration) up to 3.0 g's.
Lowell's new L83-5S is a tilt-out wall cabinet with all the bells and whistles imaginable beginning with its thin and tall physique. Measuring a mere 24"W x 32"H, this multi-use cabinet wall mounts with 6"D projection to provide vertical surface installation of equipment up to 5.25"H (3RU) x 17.25"D. The long list of features includes oil-filled dampers to provide controlled lowering of equipment to the horizontal/service position; 3RU EIA mounting rails; a built-in/removable writing surface, and a separate top compartment with an additional 5.25"H (3RU) x 4.3"D mounting area
hidden behind a pocket door. The top compartment also features a hinge on the right side for swing-out service access to a field installed 19”W x 3RU panel such as Lowell's LD9-RMP (order separately) for mounting low-voltage Decora-style controls such as microphone connectors, phono jacks, switches, indicators or volume controls. For security convenience, the contents of the top and bottom compartments are secured by a single lock. This extraordinary space saving cabinet is ideal for use in corporate boardrooms, education, entertainment, government, healthcare, hospitality, houses of worship, industrial, institutional and retail applications.
15W UNIHORN with trim ring & grille
New Vandal proof grille available
Lowell's LUH-15T 15W Unihorn™ with fine-perf grille (included) or vandal-proof grille (order separately) provides superior installation opportunities and cosmetics for recessed or surface flange-style horns. Using less than 4" of depth, the Unihorn™ quickly screw mounts into brick/concrete block or clamps into plaster or drywall. Its revolutionary all-season design, complete with press-fit architectural aluminum grille, sets new expectations for how well a utility horn can fit into the architectural decor. Installation ease and aesthetics are just some of the Unihorn™ benefits as it provides loud and clear articulation of standard or supervised pages at 105dB SPL (1W1M), simple 2-wire hook up, dual capacitor circuitry and convenient front and rear transformer adjustment. The Unihorn™ ships ready to install with a trim ring and grille. An optional vandal-proof grille insert (cast aluminum with protective mesh screen) is available - order Model LUH-VP. Additionally, a backbox for surface or recessed use (LUH-BOX) and a trim plate for finishing recessed installs (LUH-TP) are available. The Unihorn™ will also mount to standard 8" grilles and backboxes if desired, however the engineered family of Unihorn™ accessories provides superior aesthetic and installation opportunities.
Lowell’s new RMK Series rack kits are engineered as a hinged shelf with separate face plate. Unique design ships flat for economical inventory/storage. The face plate is made to your specifications and secures on standard EIA spacing to achieve a finished appearance for installations with non-rackmount equipment. To install, simply open the box, secure equipment using the hold-down brackets supplied, then mount the shelf and face plate. If equipment changes in the future, simply replace the face plate instead of buying a whole new kit. Choose 2RU, 3RU and 4RU heights with 12”, 14 or 16” depth. Sturdy 14 gauge steel construction provides substantial support. Optional rear extension brackets are also available for installations that require rear rail support.
Sequentially controlled AC loadcenter system
Lowell's ACLC Series sequenced AC loadcenter systems provide one switch remote control of circuit breakers for time sequenced AC power distribution to sound system components. UL Listed ACLC Series is engineered to provide easy ordering and simple installation. Package systems include Model ACSC-248 sequencer bundled with two remote switches and a Cutler Hammer loadcenter (choose 1-phase 100A or 200A; or 3-phase 125A or 225A main breaker). Lowell also offers individual 20A and 30A breakers (single or dual) with plug-in control cable. Breaker control cable simply plugs in to the sequencer to set and change sequence operation - no wires to strip. Sequence delay is easily set from 0.5 to 10 seconds using a flat blade screwdriver. To configure a loadcenter with more than one sequencer or to retrofit an existing Cutler Hammer or compatible loadcenter, sequencer Model ACSC-248 may be ordered separately.
Suppressors receive UL Listing and meet GSA Grade A - Mode 1 - Class 1 requirements
Lowell introduces ACSP Series single-circuit surge suppressors with UL Listing (1449-2) and endurance test results that meet government GSA Grade A - Mode 1 - Class 1 requirements for surge suppressors. The ACSP Series meets ANSI C62.41 and protects line to neutral without ground wire contamination. The compact design rear mounts easily into a rack making it ideal for protecting audio, video, broadcast, computer, DSP, sound recording and reinforcement equipment from transient voltages, spikes and surges. Far exceeding UL requirements, these suppressors defeat surges up to 72,000 amps using Lowell’s Triple Clamping RedundancyTM (TCR) technology and have a response time of less than 5 nanoseconds. Model ACSP2004 and ACSP2004-IG are 7"W x 8"H x 3"D and feature two 20A standard duplex and isolated ground duplex outlets respectively. For plug-in convenience in a crowded rack, outlets are mounted on 90º plates that can be rotated for front or side access. Outlet plates may also be replaced with blank 90º plates (provided) for clean hardwire applications. The front includes three LED's for visual ground verification and diagnostics.
IMountTM Series performance speaker systems for flying or bolting to Unistrut® offer consultants and integrators over 130 ready-to install-systems with a variety of performance and aesthetic options. The complete series has been upgraded to include forged 1/4" - 20 eyebolts for demanding flown installations and a flush 4" x4"overplate for easy yet unobtrusive access to wire connections. Selected models are now being UL Listed (contact factory for ship date and model offering). Lowell's iMountTM series features a choice of five drivers (12P150, 10P125, 8P100, 8A50, and 8S100) wired in a choice of three rectangular (3, 2, 1 cu.ft.) or three cylindrical (2, 1.25, 0.75 cu.ft) enclosures lined with 1-1/2" thick acoustic batting. Options include choice of transformer and grille. See catalog pp 34-37.
iMount™ Q-Series premium performance
Lowell's 3cu.ft. rectangular iMountTM Q-Series packages are now available with a new 250-watt 'consultant's choice' 12-inch driver. Quality systems have been designed for high performance and high power handling. The premium 12Q250 driver features a 4-inch voice coil, cast aluminum basket, premium crossover engineering, and massive magnet structures on the woofer and compression tweeter: Model numbers with system specifications are shown below. Cylindrical versions are also available. Please allow 4-8 weeks lead time as these premium performance systems are built-to-order.
SB Series Coaxial Ceiling Assemblies
Ready-to-install systems with 8" or 6.5" driver offer a high performance and cosmetically clean solution for installing music/paging systems above acoustic tile or sheetrock. Assemblies ship with pre-loaded driver, wired transformer, and hardware-free grille. They are similar to Lowell’s CN Series packaged assemblies (catalog page 40) with an extended lip on the backbox and an all-white grille that emulates a recessed lighting fixture. Like the CN Series, the SB Series includes Lowell’s high performance coaxial driver Model 8A50 (8" 50W) or 6A40 (6.5" 40W) direct mounted to 10"D acoustic backbox Model IX810-EL or IX610-EL. The hardware-free grille Model SB8W-EL (included) features welded torsion brackets for fast and visually clean snap-in position mounting.
DS Series Dual Cone Wall / Surface Assemblies
Speaker assemblies with 8-inch driver are easy-to-install paging and background music systems for school classrooms, medical offices, and anywhere that an attractive surface-mounting speaker is required. Slope front Model DSL810-72 and square Model DSQ810-72 feature 15W dual cone driver Model 810 with a 70/25V transformer factory mounted to Lowell's popular SG-8 beveled edge grille. The system backboxes (slope-front and square) are lined with 1-1/2" thick acoustic batting and feature a universal mounting hole pattern on the rear and knockouts for 500 Series wire-mold top and bottom for trouble free installation. The assembly is finished in Lowell's neutral network (computer) gray powder epoxy.
LT Series Tile Speakers in 2' x 2' value models
By popular request, Lowell now offers two new 2' x 2' assemblies that are value priced using dual cone driver models 810 (15W) and 805 (12W). Ready to install systems include a dual voltage transformer with terminations exiting through a metal clamp on the 8XD4 protective backbox.
Keylock Volume Controls on a 1-gang plate
KL100 Series patented keylock volume controls are now a compact 1-gang size (formerly 2-gang) with power handling to 100 watts. Keylock secured devices are ideal for applications where the ability to make volume adjustments is limited to authorized individuals. Controls are offered with a Decora-style two-piece wall plate for versatile application in single or multi-gang installations. Choose white, ivory, black, or stainless steel plate. Stainless models have a black or white subplate and will be available in a 1-piece plate version by 4th quarter. All feature 3dB per step attenuation and phoenix-style removable screw termination for pre-wire with capacity for 14ga wire. Models with priority relay (24 VDC @5mA) allow emergency and paging signals to bypass (override) the attenuator. Mounting depth is a mere 1.75 inches to fit into standard electrical boxes.
Keyboard / Monitor shelf - Heavy duty
Model L29K is a reinforced keyboard shelf engineered to mount an extended keyboard and support a full-size computer monitor. Heavy-duty assembly features a slide out shelf with a rotating tray to accept a standard (18"W) keyboard. Simply mount the keyboard to the tray and swivel into user or storage position. When the drawer is closed, a snap-close panel secures the drawer. A standard keylock is also available; suffix -L. Each keyboard drawer also includes a full-length wrist pad and a mouse pad extension that slides for right- or left-hand use. 19"W x 20"D drawer with 16" extension mounts on front and rear rails and is reinforced on the top for heavy equipment support. Panel height is slightly larger than 2RU (4.34"H) yet shouldn't pose a space problem as the top shelf is designed to support monitors of varying heights. Finish is black powder epoxy.
Easy-Mount AC Power Strips with Plug
ACS Series power strips are 15A relocatable devices that provide convenient access to power in racks and cabinets. Easy to install AC power strips feature a mounting clip with single screw and terminate to a cord with molded plug (see lengths below). ACS Series is UL Listed and features single receptacles with spacing conducive to plugging in large power supplies. For secure operation of larger/heavier supplies in a vertical rack orientation, a bag of cable ties is provided for installation convenience. Each receptacle is white for easy visibility inside a dark cabinet. Model ACS-1506 has six receptacles and measures 20"L, ACS-1512 has twelve and is 32"L, ACS-1524 has 24 receptacles and is 60"L. All three sizes include transient voltage surge suppression (UL 1449-2 Listed) with an LED indicator and a 15 Amp circuit breaker.
Tilt-out Wall Cabinet with 3RU
Lowell's new tilt-out wall cabinet Series L87 is ideal for surface or recessed wall installation of rackmount and non-rackmount electronics in schools, training facilities, retail stores, and anywhere a 3RU tilt-out wall cabinet with locking security is desired. Series includes surface mount (L87-5SE) and semi-recessed (L87-5RE) versions with vertical equipment loading so that controls face up achieving minimal projection from the wall surface. Feature rich design offers adjustable seven-position mounting rails plus two adjustable height hold-down brackets for securing non-rackmount gear such as consumer DVD players or VCR's. Each model also includes two internal and three external (frame mounted) cut-outs with blank cover plates for installing low voltage Decora®-style devices such as on/off indicator lights, switches, microphone connectors, phono jacks, or volume controls. Models also include ventilation slots for air circulation, knockouts, adequate space for internal installation of an E.O. Box, and two safety latches for solid support when opened to the 90-degree service position. Finish is Lowell's durable powder epoxy in neutral network (computer) gray.
New Rackmount Device Panels with PocketIDTM
Expanded selection of rackmount device panels presents a clean and organized solution for custom mounting devices in minimal rack space. All feature a steel panel finished in black with control cutouts, hardware, a rear lacing flange for wire management, and a mounted black polycarbonate overlay with clear top pocket for label strip identification of controls. All controls are ordered separately. Visit the Lowell website for a label making template for each panel (MSWord® format).
Click here for Specification Sheet
Click here for PocketID label program for LD8-RMP (panel for 8 decora-style devices) (MSWord file)
Click here for PocketID label program for LVC-RMP (panel for 8 LVC volume controls) (MSWord file)
Click here for PocketID label program for LN10-RMP (panel for 10 Neutrik D devices) (MSWord file)
Click here for PocketID label program for MP-16 (16 channel monitor panel) (MSWord file)
Slope-front Rolling Rack
Now available with optional top!
Lowell's rolling slope-front rack Model L45-21 is an under-counter rackmount solution with mobile convenience and slope-front viewing comfort. Rack features side handles, casters, a unique "stow-away" door, and two cutouts with blank cover plates for external mounting of optional accessory switches or controls. Height is 26.875" (including casters) to fit easily under desktop height surfaces and counters.
Ergonomic design features 12RU of mounting space on a 15 degree slope for comfortable viewing of equipment while seated. The locking front door opens out from the top and may be slid into the base for out-of-sight storage or simply lifted off. Stowing/lift-off door design resolves the common problem of open doors blocking equipment in neighboring racks. The rear door is recessed with lock, traditional right hinging, and a 2"H lower opening for wire access.
Rack also features two Decora®-style cutouts with cover plates above the locking front door for optional mounting of low voltage accessory switches or controls. External location of switch devices such as system status indicators, on/off power switches, microphone connectors, phono jacks or volume controls allow the rack to remain locked and secured. Construction is 16-gauge steel finished in Lowell's durable black powder epoxy.
New Dual Door System
Lowell introduces an architecturally appealing door system to solve the growing need for separating and securing equipment within a rack or cabinet. Attractive "boardroom quality" solution for dual-access security features a beveled edge frame (L46 Series) that face mounts similar to a standard door and includes threaded inserts for attaching up to two doors with left or right hinging. The dual door system does not take up any panel mounting space or disturb previously installed equipment. It is easily field mounted without drilling or may be factory installed when ordered with the cabinet.
The versatile system can be utilized on all Lowell ganging racks, floor and sectional wall cabinets. The steel frame is 1"D with vents to match the cabinet. Each frame accepts a combination of standard doors (1"D) with choice of steel, Plexiglas (-P) or perforated steel (-PF) styling. For security, top and bottom doors are keyed differently.
Click here for Specification Sheet
New Sequential Switching Systems
Lowell Models SCS-4R and SCS-8R are rackmount sequencers that provide time-delayed activation and de-activation of equipment that is connected to Lowell Remote Power Controls. Model SCS-4R provides four control outputs and SCR-8R provides eight outputs. Each output can activate equipment connected to a maximum of ten Remote Power Controls (Series RPC - order separately). Additionally, each output also includes a separate auxiliary relay contact for sequenced operation of other devices.
Sequencers feature a 1RU chassis, variable time delay, LED status indicators, UL Listed power supply, and rocker or keyswitch activation. Optional switch(es) may also be used to activate the sequencer from remote location(s). (order Decora®-style wall switch Model RPSW-M separately.)
Click here for Specification Sheet
New Sound Masking Generator/Amplifier
Model SMGA-5 is a masking generator with 5W amplifier. Compact 1RU device is ideal for small stand-alone masking or masking with paging installations. It may also be used to add masking capability to an existing paging system or zoned area.
The generator produces the pink noise signal for sound masking. The built-in amplifier (5W into 70V, 25V, or 8ohm) may be used for paging, music, or signaling sources. System controls include output level and an adjustable low pass filter, level adjustment for the auxiliary input signal, noise level, master level and individual tone controls for shaping bass, midrange, and treble frequencies.
Click here for Specification Sheet
Lowell is the leader in innovative and value-added product solutions for the commercial sound, security, professional audio, broadcast, data communications, audio/visual, and custom residential markets. A reliable resource for systems integrators begins with a broad and high quality product offering.
