VC-LD1

The VC-LD1 gives you the advantages of balanced/unbalanced signal conversion, impedance conversion, level boost or cut. The VC-LD1 allows bridging of any audio line, adjusting the gain, and driving a balanced and an unbalanced line output simultaneously. The circuit design allows the input to accept simultaneously summed balanced and unbalanced signals, of either high or low impedance.

Click here for more VC-LD1 specification sheet .

VC-MP1

The VC-MP1 gives you the advantages of high quality low noise mic preamp, Hi or Lo impedance mic input conversion to line level, with phantom power and adjustable output level. The VC-MP1 has both a high impedance unbalance output and a Lo impedance balanced output which can be used simultaneously.

Click here for more VC-MP1 specification sheet .

VDA-06

The FNB-112 will drive 12 electronically balance mic or line level selectable outputs. A telco output will drive, interface with and maintaine a 600 ohm telco output to drive and deliveran audio signal to remotely located media members via a standard POTS telephone line. A looping output connector allows for multiple units to be ganged and stacked in order to driveas many output as desired. An 8 L.E.D. vu level meter monitors the output signal and a 3 L.E.D. vu level meter monitors the input signal. The FNP-112 can be rack mounted or horizontally stacked.

Click here for more VDA-06 specification sheet

VPA-10

The VPA10A is a versatile 10 watt background music amplifier. This versatile amplifier features a high performance transistor power amplifier with output capability of 10 watts (rms) into a 4 or 8 ohm load, as well as 25 and 70 volt line loads. Output protection consists of current limiting, transient suppression diodes and AC fuse.

The preamplifier sections includes built-in muting ciruity and feedback type bass and treble controls. Input capability of the basic unit provides unit provides for for unbalanced medium level program input with a front panel gain control and a rear panel sensitivity control. The medium level program

Click here for more VPA-10 specification sheet .

FNB-2412D

The FNB-2412D will drive 24 electronically balance mic or line level selectable outputs. The 24th output will drive, interface with and maintaine a 600 ohm telco output to drive and deliveran audio signal to remotely located media members via a standard POTS telephone line. The unit also has 12 unbalanced output and a headphone monitor out The input to the FNB-2412D is both electronically ballanced and transformer isolated. A looping output connector allows for multiple units to be ganged and stacked in order to driveas many output as desired. An 8 L.E.D. vu level meter monitors the output signal and a 3 L.E.D. vu level meter monitors the input signal.

Click here for more Press box specification sheet .

FNB-112

The FNB-112 will drive 12 electronically balance mic or line level selectable outputs. A telco output will drive, interface with and maintaine a 600 ohm telco output to drive and deliveran audio signal to remotely located media members via a standard POTS telephone line. A looping output connector allows for multiple units to be ganged and stacked in order to driveas many output as desired. An 8 L.E.D. vu level meter monitors the output signal and a 3 L.E.D. vu level meter monitors the input signal. The FNP-112 can be rack mounted or horizontally stacked.

Click here for more Press box specification sheet .